Phone:  1-800-MrWinch
(679-4624)
Fax:   1-619-474-6730
Email:  info@ryanhyd.com
Home About us Site map      
Tulsa Upright Winches

Tulsa Winch offers eight upright winch models, ranging in linepull from 10,000 pounds to 100,000 pounds.  These products are most commonly mounted behind the cab of a truck or on a flat surface so the winch line is above the mounting plane of the winch.

Every Tulsa upright model is equipped with an automatic winch brake and can be driven either mechanically from a power take-off or electric motor, or hydraulically with a direct mounted hydraulic motor.

Typical uses include oilfield rig-up trucks, wreckers, railroad car spotting, barge spotting and other operations involving high linepulls at relatively slow speeds.

Tulsa upright winches feature gears made of manganese bronze for long life and smooth operation; drum clutches for manual-free spooling of winch line; higher efficiencies and larger cable drums for faster linespeeds, and larger drum shafts for extremely heavy pulls.

On larger models, gear housings are split horizontally for easier service.  Choose from automotive-style shoe brakes or multiple disk oil brakes.  Optional features include two-speed hydraulic motors and air controls for clutch and band brake operation.  Drive groups for both mechanical and hydraulic drive units are also available.

Model First Layer Linepull (lbs.) Ratio Recommended Cable Size (in.) Cable Capacity (Ft.) Max Worm Speed (RPM) Static Input Torque at Rating (Lb.in.) Dynamic Input Torque at Rating (Lb.In.)
1138 10,000 38:1 7/16 256 1200 1620 1100
10 15,000 27:1 9/16 175 600 3305 2411
19 20,000 30:1 5/8 272 600 5304 3830
23 20,000 30:1 5/8 268 500 5536 3998
34 30,000 32:1 3/4 313 400 8151 5850
64 45,000 34:1 7/8 306 400 13086 9458
70 65,000 43:1 1 291 400 15156 10954
80 100,000 50:1 1 352 400 20053 14493